SERIE CM10 EtherNet

MULTITURN ABSOLUTE SOLID SHAFT ENCODER

  • EtherNet/IP
  • Programmable up to 30 bits (65.536 points per turn, 16.384 turns)
  • External diameter 58 mm
  • Shaft Ø 6 or 10 mm
  • Protection class IP65 according to DIN EN 60529
  • Connection by industrial connector 3 x M12
Ask an expert

Our team of experts will asnwer your technical, product or application questions as soon as possible.

Name*

E-mail*

Phone

Company

Country

Message


I have read and I accept the terms and conditions.*

HOHNER AUTOMATICOS, S.L. informs you that the personal data that you provide by filling out this form will be treated with the purpose of sending you the information requested. The legitimation of the treatment is carried out through the consent of the interested party. Failure to enter your personal data will make it impossible to meet your request. You can exercise your rights of access, rectification, cancellation and deletion of personal data by contacting info@encoderhohner.com or by post to HOHNER AUTOMATICOS, S.L., Prolongació C/Sant Francesc, s/n, 17400 - Breda (Girona) Spain.

Fields with a * are required.

Download Datasheet

Plaease enter your email to download product Datasheet.

E-mail

I have read and I accept the terms and conditions.*

HOHNER AUTOMATICOS, S.L. informs you that the personal data that you provide by filling in this form will be treated with the purpose of sending you the information requested. You can exercise your rights of access, rectification, cancellation and deletion of personal data by contacting info@encoderhohner.com.

Name*

E-mail*

Phone

Company

Country

Message


I have read and I accept the terms and conditions.*

HOHNER AUTOMATICOS, S.L. informs you that the personal data that you provide by filling out this form will be treated with the purpose of sending you the information requested. The legitimation of the treatment is carried out through the consent of the interested party. Failure to enter your personal data will make it impossible to meet your request. You can exercise your rights of access, rectification, cancellation and deletion of personal data by contacting info@encoderhohner.com or by post to HOHNER AUTOMATICOS, S.L., Prolongació C/Sant Francesc, s/n, 17400 - Breda (Girona) Spain.

Fields with a * are required.

MECHANICAL SPECIFICATIONS
Materials Housing: Aluminium
Flange: Aluminium
Shaft: Stainless steel
Bearings Ballraces
Bearings lifetime 55×10⁸ rev. (Clamping) [40 N / 110 N]
150×10⁸ rev. (Clamping) [40 N / 60 N]
85×10⁸ rev. (Synchro) [40 N / 110 N]
195×10⁸ rev. (Synchro) [40 N / 60 N]
Shaft diameter 6 or 10 mm
Maximum number of revolutions permitted mechanically ≤ 12000 rpm
Protection according to DIN EN 60529 IP65
Rotor inertia moment ≤ 30 gcm²
Starting torque at 20°C (68°F) ≤ 0,03 Nm
Maximum load permitted on axial shaft 40 N
Maximum load permitted on radial shaft 110 N
Weight aprox. 370 g
Operating temperature range -40°C to +85°C
Storage temperature range -40° to +85° C
Humidity 98% RH, no condensation
Vibration according to DIN EN 60068-2-6 100 m/s² (10Hz…1000Hz)
Shock according to DIN EN 60068-2-27 1000 m/s² (6ms)
Radial connection 3 x M12 Connector
Mating connectors not included
ELECTRICAL SPECIFICATIONS
Interface EtherNet/IP
Output Driver Ethernet
Power supply 10…30 VDC
Consumption ≤ 230 mA (10 VDC)
≤ 100 mA (24 VDC)
Power Consumption ≤ 2.5 W
Start-Up Time < 250 ms
Singleturn resolution up to 16 bit
Multiturn resolution up to 14 bit
Accuracy (INL) ±0.0220° (14 – 16 bit)
±0.0439° (≤13 bit)
Code Binary
Short circuit protection Yes
Protection polarity inversion Yes
EMC: Emitted Interference DIN EN 61000-6-4
EMC: Noise Immunity DIN EN 61000-6-2
MTTF 65 years