INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS
- Resolution up to 5.000 pulses per turn
- External diameter 77 mm
- Hollow shaft up to Ø 25 mm
- Protection class IP65 according to DIN 40050
- Shaft fixing through front or rear setscrews
- Anti-rotation system using elastic flange
- Connection by cable (any cable lenght available) or industrial connector M23
If you need 3D step-file of your reference contact us and you will receive it within one working day.
| MECHANICAL SPECIFICATIONS | |
|---|---|
| Materials | Cover: Aluminium Housing: Aluminium Shaft: Stainless Steel |
| Bearings | Ballraces |
| Bearings lifetime | 1×1010 rev. |
| Housing fixation | Flexible flange |
| Shaft fixation | Front or Rear setscrews |
| Hollow shaft diameter | 15, 16, 17, 18, 19, 20, 24 or 25 mm |
| Maximum number of revolutions permitted mechanically | 6000 rpm |
| Protection against dust and splashes according to DIN EN 60529 | IP65 |
| Rotor inertia moment | ≤ 1 Kg cm2 |
| Starting torque at 20ºC (68ºF) | ≤ 0,04 Nm |
| Maximum load permitted on axial shaft | ≤ 100 N |
| Maximum load permitted on radial shaft | ≤ 200 N |
| Permited misalignment: | ±0.5 mm axial, ±0.3 mm radial (90.1025 – one) ±0.4 mm axial, ±0.2 mm radial (90.1025 – three) |
| Weight aprox. | 0,5 Kg |
| Operating temperature range | -20°C to +80°C – Standard -40°C to +80°C – Special Customer NT00 |
| Vibration according to DIN EN 60068-2-6 | 100 m/s 2 (10Hz…2000Hz) |
| Shock according to DIN EN 60068-2-27 | 1000 m/s 2 (6ms) |
| Maximum pulses per turn | 5.000 |
| Radial connection | 2 meters cable or industrial connector M23 (other cable lenghts available on order) Female connector not included |
| OUTPUT SIGNALS | ||||
|---|---|---|---|---|
| OUTPUT CIRCUIT | NPN Open Collector | Push-Pull Differential |
RS422 (TTL compatible) | RS422 (TTL compatible) |
| Power supply | 11…30 VDC | 11…30 VDC | 5 VDC ±10% | 11…30 VDC |
| Output voltage | 11…30 VDC | 11…30 VDC | 5 VDC | 5 VDC |
| Consumption | 40 mA | Tipical: 45 mA Max: 150 mA |
Tipical: 70 mA Max: 150 mA |
Tipical: 80 mA Max: 160 mA |
| Max. load capability / channel | 40 mA | ±30 mA | ±20 mA | ±20 mA |
| Lenght of cable allowed | 50 m (24 VDC) | 100 m | 1200 m | 1200 m |
| “Low” signal level | VOL < 0.4 VDC (24 VDC) | VOL < 2.5 VDC | VOL < 0,5 VDC | VOL < 0,5 VDC |
| “High” signal level | VOH > 22 VDC (24 VDC) | VOH > 2.5 VDC | VOH > 2.5 VDC | VOH > 2.5 VDC |
| Frequency | 100 kHz | 200 kHz | 300 kHz | 300 kHz |
| Short circuit protection | Not permanent | Yes | Yes | Yes |
| Protection polarity inversion | Yes | Yes | Yes | Yes |
| Channel B leads (90° electric) channel A, view from the shaft, shaft rotating clockwise | ||||
