ИНКРЕМЕНТАЛЬНЫЙ ЭНКОДЕР С ВЫХОДЯЩИМ КОНИЧЕСКИМ ВАЛОМ ДЛЯ ПРОМЫШЛЕННОГО ПРИМЕНЕНИЯ
- Количество импульсов на один оборот вала 2048
- Внешний диаметр 58 mm
- Конический вал 1:10
- Уровень защиты IP54 по DIN EN 60529
- Присоединение кабельное (доступна любая длина кабеля) или промыш енныйсоединитель
If you need 3D step-file of your reference contact us and you will receive it within one working day.
| MECHANICAL SPECIFICATIONS | |
|---|---|
| Materials | Cover: Aluminium Housing: Aluminium Shaft: Stainless Steel |
| Bearings | Ballraces |
| Bearings lifetime | 1×1010 rev. |
| Maximum number of revolutions permitted mechanically | 6000 rpm |
| Protection against dust and splashes according to DIN EN 60529 | IP65 — Standard IP67 — Option 10A |
| Rotor inertia moment | 30 gcm2 |
| Starting torque at 20ºC (68ºF) | ≤ 0,02 Nm — Standard ≤ 0,03 Nm — Option 10A |
| Maximum load permitted on axial shaft | 40 N |
| Maximum load permitted on radial shaft | 80 N |
| Weight aprox. | 0,5 Kg |
| Operating temperature range | -20ºC to +80ºC — Standard -40ºC to +80ºC — Special Customer AT00 |
| Vibration according to DIN EN 60068-2-6 | 100 m/s2 (10Hz…2000Hz) |
| Shock accoording to DIN EN 60068-2-27 | 1000 m/s2 (6ms) |
| Maximum pulses per turn | 50.000 |
| Axial or radial connection | 2 meters cable or industrial connector (different models available, other cable lenghts available on order) Female connector not included |
| OUTPUT SIGNALS | ||||
|---|---|---|---|---|
| OUTPUT CIRCUIT | Sine-wave | |||
| Power supply | 5 VDC ±10% | |||
| Output voltage | 5 VDC | |||
| Consumption | Tipical: 40 mA Max: 90 mA |
|||
| Lenght of cable allowed | 10 m | |||
| Signal type | SIN/COS, 1Vpp | |||
| Output signal level | 0.6 to 1.2 Vpp | |||
| Signal offset | 2.5 VDC | |||
| Reference | 0.2 to 1 VDC | |||
| Max. frequency (a -3dB) | 200 kHz | |||
| Protection polarity inversion | Not permanent | |||
| Cosine leads (90° electric) Sine, view from the shaft, shaft rotating clockwise | ||||
