DRAW WIRE SSI ENCODER
- SSI output
- Singleturn resolution 13 bits
- Magnetic technology
- Protection class IP51 according to DIN EN 60529
- Connection by industrial connector Sub-D 9p
| MECHANICAL SPECIFICATIONS | ||||
|---|---|---|---|---|
| Materials | Cover: Plastic Housing: Aluminium |
|||
| Travel | 204.8 mm per turn | |||
| Cable | Ø 0,61 stainless steel AISI316 | |||
| Measurement range, up to (mm) | 819.2 mm. | |||
| Maximum cable extension (mm) | 910 mm. | |||
| Minimum cable static tension | 9 N | |||
| Maximum cable static tension | 6 N | |||
| Maximum speed | 1 m/s | |||
| Protection against dust and splashes according to DIN EN 60529 | IP51 | |||
| Operating temperature range | -20ºC to +50ºC | |||
| Weight | 0,9 kg. | |||
| Vibration according to DIN EN 60068-2-6 | 100 m/s (10Hz…2000Hz) | |||
| Shock according to DIN EN 60068-2-6 | 1000 m/s (6ms) | |||
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| Interface | SSI |
| Electronic output | RS422 |
| Power supply (VDC) | 11…30 VDC |
| Consumption | ≤ 100 mA |
| Code | Binary Gray |
| Protocol | SSI |
| Singleturn resolution | 13 bits |
| Repeatibility | ±1 digit |
| Accuracy | ±1 digit |
| Max. load capability / channel | ±20 mA |
| «Low» signal level | < 0,8 VDC |
| «High» signal level | 2 … 5,5 VDC |
| Frequency | 50 kHz…2 MHz |
| Short circuit protection | Yes |
| Protection polarity inversion | Yes |
