SIN/COS + SIN/COS
If you need 3D step-file of your reference contact us and you will receive it within one working day.
| TECHNICAL SPECIFICATIONS | |
|---|---|
| Materials | Cover: Aluminium Housing: Aluminium Shaft: Stainless Steel |
| Bearings | Ballraces |
| Bearings lifetime | 1×1010 rev. |
| Housing fixation | Expanding coupling 90.1100 (assembled) Flexible flange 90.1027 (assembled) |
| Permitted misalignment | ±0.5 mm axial (90.1100) ±0.5 mm axial, ±0.3 mm radial (90.1027) |
| Maximum number of revolutions permitted mechanically | 6000 rpm |
| Protection against dust and splashes according to DIN EN 60529 | IP54 |
| Rotor inertia moment | ≤ 3×10-6 Kgm2 |
| Starting torque at 20ºC (68ºF) | ≤ 0,02 Nm |
| Maximum load permitted on axial shaft | 40 N |
| Maximum load permitted on radial shaft | 60 N |
| Weight aprox. | 0,4 Kg |
| Operating temperature range | -20ºC to +80ºC |
| Vibration according to DIN EN 60068-2-6 | 100 m/s2 (10Hz…2000Hz) |
| Shock accoording to DIN EN 60068-2-27 | 1000 m/s2 (6ms) |
| Consumption | ≤ 90 mA |
| Power supply | 5 VDC ±10% |
| Electronic incremental output | SIN/COS, 1 Vpp ±20% |
| Incremental resolution | 2048 SIN/COS |
| Electronic absolute output | SIN/COS, 1 Vpp ±20% |
| Absolute resolution | 1 SIN/COS to 360° mechanical |
| Frequency (at.3dB) | ≤ 200 kHz |
| Signal offset | 2,5 VDC |
| Helicoidal cable | 2 meters cable (other cable lenghts available or connector mounted at the end of the cable, upon request) or 30 cm cable + connector D-Sub 15p |