Impulse counter, ratemeter and periodmeter
- Reading at 6 digits with 14 mm digit height
- Standard size of 96 x 48 mm
- Admits all type of impulse signals and encoders
- Provides excitation voltage fot the sensor
- Universal high and low AC and DC power options
- Optional output modules
| TECHNICAL SPECIFICATIONS | |
|---|---|
| Digits | 6 |
| Reading | 999999 / -199999 |
| Decimal Point | Configurable |
| Led color | Red (standard) |
| Digit height | 14 mm |
| Signals accepted | NPN, PNP, Namur, pick-up, TTL, inductive, mechanical, quadrature… |
| Excitation voltage | +5 Vdc, +9 Vdc, +15 Vdc, +18 Vdc (max. 70 mA) |
| Máximum Vdc at input terminals | ± 30 Vdc |
| Quartz accuracy | ± 0.01 % |
| Thermal stability | 20 ppm/ºC |
| Display refresh | 15 refresh / second |
| Maximum frequencies | Counter up to 250 KHz Ratemeter and periodmeter up to 500 KHz |
| Mínimum frequencies | Ratemeter and periodmeter down to 1 mHz (0.001 Hz) |
| Power ‚H‘ | 85 a 265 Vac/dc (isolated 2500 Veff) |
| Power ‚L‘ | 11 a 60 Vdc y 24/48 Vac (isolated 1500 Veff) |
| Retransmission and control options | Relays, analog output, serial communications… |
| Consumption | <1.5 W (meter only) <4.0 W (meter with options) |
| Front protection | IP65 |
| Connections | Plug-in screw terminal |
| Weight | <150 grams |
| Mounting | Panel |
| Front size | 96 x 48 mm |
| Panel cut-out | 92 x 44 mm |
| Deep | 91 mm (including terminals) |
| Operating temperature range | 0 to +50ºC |
| FUNCTIONS INCLUDED | |
|---|---|
| ‚Fast Access‘ menu | A single press on the front keypad gives access to alarm setpoint modification, preset, memories… |
| ‚SLOW‘ mode | Special mode for low frequency ratemeter applications |
| ‚FAST‘ mode | Special mode for high frequency counter applications |
| Scaling factor | Multiplier and divider from 1 to 999999 |
| Configurable reset | Front and rear reset, and reset linked to alarm activation |
| Preset | Configurable |
| Trigger level | Configurable |
| ‚Trigger sense‘ function | Help on setting the correct trigger level |
| Sensor selection | By menu |
| Cycle counter | Count of cycles defined by the ‘on alarm reset’ function |
| Retention memory | Recovers the counting value in case of power loss |
| ‚On power-up‘ function | Protects remote systems by delaying the output and control signals at cold start-up |
| Alarms | With one or two setpoints, independent activation and deactivation delays, hysteresis, optional manual deactivation of the relay |
| Inverted relay | For security applications |
| Display filters | Recursive filters for unstable signals |
| Brightness | 5 levels of brightness intensity |
| Password | Blocks access to configuration menu |
